Flat Roofs and Pond Linings


Fibreglass Mouldings garage roofs  are applied to the same standards as a domestic dwelling or office complex – which will also be enhanced with our very attractive edging trims and final colour choice.

Glassfibre is ideal for all new or refurbishment projects, it can be used for many areas including balconies because the GRP is strong and flexible. By simply adding a colour pigment it can be matched to blend in with any environment.

Over the past few years a keen interest has been developed in the use of fibreglass  laminates to give a flat roofing covering that is superior to the traditional tar and felt coverings. Most people are familiar with the short-comings of the traditional systems and their relatively short life before they start to leak.


Strong, attractive and desirable our fibreglass flat roofs keep out the elements and keep your possessions safe and dry. Only FibreGlass Mouldings  flat roofs can give you that extra protection.

Using high quality polyester resins, the GRP flat roof is constructed in-situ on new timber decking or other approved suitable substrates. It incorporates specially designed and manufactured edge trims and is finished with a high performance coloured polyester topcoat.


Flexible, very strong and covering the complete roof, this monolithic construction means that the roof has no joints or seams. It is acknowledged that most water ingress problems are with systems using joints and seams.


Once installed, our GRP Roof will give trouble-free weatherproof service for over twenty years – compared to an average life expectancy of bitumen based materials. The cost benefits of such a long life system, together with the associated potential increase in property resale values, is obvious.

We don’t lay our GRP Flat Roof on top of your old decking boards. That would only seal in damp and store up trouble for later. Instead we replace all the boards above the joists with new ones which are 18mm sterling board.

You want your home to look its best, so we offer a range of colours. Green, brown, red, blue and various shades of grey. And you can choose the finish, too – such as slate chippings or a non-slip finish for when you want to be able to walk on your roof without fear of slipping.

If you have problems with your flat roof , FibreGlass Mouldings will provide a permanent worry free solution that is :

  • totally waterproof
  • completely seamless
  • withstands extremes of temperature
  • available in a choice of colours
  • from a small porch to large extensions
  • office blocks & factory roofs

FibreGlass Mouldings provides a permanent, seamless integrated fibreglass lamination.

This is completely waterproof, extremely tough, durable and able to withstand anything the British climate can throw at it!


Fibreglass pond linings to create a garden pond is probably the easiest, quickest and most cost effective way to achieve a stunning water feature in your garden.

The flexibility of a GRP pond lining allows you the freedom to design a pond that suits your requirements – without the restrictions imposed by a pre-formed pond. Provided that the top of the pond is level – the GRP lining can be moulded to any shape or size you desire.

It is important that the structure to be lined with GRP – is capable of withstanding the soil and water pressure in its own right and finally the glassfibre will add to the strength and rigidity.

Normally the pond or pool is constructed from brick or concrete block. The whole structure would then be cement rendered and left to cure – so that when we apply the resins and glassfibre the pond  will be dry and smooth. Once cured the pond would be coated by a topcoat to the colour of your choice.